Chem Polymer Corporation / Nylon 6 Heat Stablized
Nylon Type 6 heat stabilized has the same mechanical properties as general purpose nylon 6/6
with the additional advantage of heat stabilization. This material can withstand 250 F (121 C)
temperatures in long range service in most applications. Heat stabilized nylon is off white in color.
Fasteners Bearings Gears Cams Printed Circuit Board Hardware Washers Spacers
Insulators Electronic Components Bushings Strain Reliefs Hole Plugs Wiring Clips
Hose Clamps.
Approvals GMP PA6.008
Physical Units Test Method Data
Specific Gravity ASTM D792 1.13
Linear Mold Shrinkage % ASTM D955 1.4-1.8
Hardness Rockwell ASTM D785 R 118
Mechanical Units Test Method Data
Tensile Strength psi ASTM D638 11,500
Tensile Elongation at Break % ASTM D638 50
Tensile Elongation at Yield % ASTM D638 5
Flexural Modulus psi ASTM D790 415,000
Flexural Strength psi ASTM D790 15,000
Impact Units Test Method Data
Notched Izod Impact @ 23C ftlbf/in ASTM D256 1.0
Thermal Units Test Method Data
Heat Deflection Temperature (264 psi) F ASTM D648 198
Heat Deflection Temperature (66 psi) F ASTM D648 365
Melting Point F ASTM D789 420
Coef' Linear Thermal Expansion 10-5/K ASTM D696 6.2
Melt Flow Index (Condition Q) g/10 min ASTM D1238 8
Electrical Units Test Method Data
Dielectric Strength (3mm) KV/mm ASTM D149 14
Comparitive Tracking Index V >600
Volume Resistivity Ohm cm ASTM D257 1015
Flammability Units Test Method Data
Limiting Oxygen Index % ASTM D2863 25
UL 94 Flammability V2
Miscellaneuos Units Test Method Data
Relative Temperature Index elec'
     @ 0.1181 in F 257
     @ 0.0590 in F 257
     @ 0.0319 in F 257
Relative Temperature Index mech w/imp
     @ 0.1181 in F 167
     @ 0.0590 in F 167
     @ 0.0319 in F 167
Relative Temperature Index mech wo/imp
     @ 0.1181 in F 257
     @ 0.0590 in F 248
     @ 0.0319 in F 230